AISI316 Water Plate Heat Exchanger Hydraulic Oil Cooler for Temperature Control of Production Line

Basic Info

Model NO.	PLD30
Material	Stainless Steel
Heat Exchanger Type	Plate Heat Exchanger
Usage	Lube Oil Cooling
Plate Material	AISI304/316/Titanium
Gasket Material	NBR/EPDM/EPDM-Ht/FKM
Plate Pattern	Chevron Pattern
Channel Gap	3mm-6mm
Medium	Water / Waste Water
Frame	Carbon Steel
Plate Thickness	0.5mm / 0.6mm
Flow Rate	5 M3/H - 300 M3/H
Transport Package	Wooden Case
Specification	Plate type heat exchanger
Trademark	Propellent
Origin	China
HS Code	8419500090
Production Capacity	5000pieces/Year

Product Description

AISI316 Water Plate Heat Exchanger hydraulic oil cooler for temperature control of production line

Propellent Plate heat exchanger consists of a pack of corrugated metal plates, gaskets and a fix frame, the plate pack is assembled and fixed on the frame by tightening bolts.The heat is transferred through the plate between the channels which are sealed by gaskets. Large number of corrugations of the metal plate are formed by different molds to applicable various industries. The plate corrugations promote turbulent flow of fluid and support the plates against different pressure.The movable frame allows the equipment to adjust (add or remove) the plates to meet the heat duty.

Working Principle
Passing energy from one media to another in order to either heat up or cool down the media, is the basis of heat transfer. Plate heat exchangers use highly efficient flow plates to achieve the heat transfer, and are superior to tubular heat exchangers and other plate heat exchanger designs in terms of heat transfer efficiency, space requirements and ease of maintenance.

We supply a wild range of heat exchange products. Which include plate heat exchangers, shell tube heat exchangers, brazed plate heat exchangers, plate type condensers, wide gap plate heat exchangers, welded plate heat exchangers, heat-exchange units, plate type evaporators, air coolers air-handling system, water cooling equipment, waste heat recovery integration device, etc. The application scope covers HVAC, chemical, food and beverage, sugar, metallurgy, power, paper, textiles, shipping and refrigeration, etc.

 

Plate Pattern

The media flow through the channels of the pattern that is pressed into the heat transmission area of each plate. As such, the patterns have great impact on the heat transfer efficiency of the heat exchanger and must be carefully chosen to accommodate the specific requirements of each thermal duty. The sized of the needed heat transmission area can be reduced if a higher amount of the pressure drop is used. This makes it important to use the allowed pressure drop to the fullest. Some patterns only use a low pressure drop, but offer a lower level of turbulence, while others offer high turbulence in exchange for a high pressure drop. Other patterns have very deep channels, making them suitable for high-viscosity media and media that cause fouling.

Propellent Plate Heat Exchanger
Plate Type	Single-pass plate
Flow Channel Between Plates	3.5mm ~12.0mm (Optional depends on working condition)
Plate Thickness	0.4mm ~ 1.0mm
Heat Transfer Plate Material	Stainless steel - 304/304L, 316/316L, 254 SMO, Titanium, Hastelloy C-276, others
Gasket Material	NBR, EPDM, HNBR, HEPDM, NBR-HT, FKM, Viton-A, Viton-G
Frame Material	Carbon steel, stainless steel and others on request
Temperature Range	-50ºC ~ +180ºC Varies with the media and gasket selection.
Maximum Pressure	Maximum standard pressure 10 bar / 16 bar
Port Connection	DN32, DN50, DN80, DN125, DN150, DN200, DN250, DN350

Plate heat exchanger Production

Application

Propellent, as the promoter and one of the leaders of effective heat exchanger technology, has been designing and manufacturing heat exchangers for decades of years. Propellent offers a full range of heat exchangers and heat transfer services in all type of industries. To achieve high efficiency at low operating costs, greater application possibilities at a lower investment cost. Customized solutions are provided to match the requirement of customers.

We also offer abundant types of replacement parts for plate heat exchangers, these spare parts apply to international brands in all direction, such as AlfaLav, GEA, APV, Sondex, Tranter, Vicarb, Hisaka, API etc, to meet our clients' demand all over the world.

 

Propellent service

Design/Calculate/Data/Drawings12 months free warranty and life-long maintenance Training and Operation ManuelTop quality, Competitive price, Fast fedback Package details: standard export plywood case & carton & customizing according to your requirements.

Any requirement and questions,Feel free to contact us!